SO GUYS HERE IS A TRICK TO CONVERT YOUR BADA TO ANDROID
READ CAREFULLY
Disclaimer:
This stuff is still experimental, me, nor the devs will be responsible for any damage done to you, your phone or whatsoever, so USE AT OWN RISK
Warning:
Do NOT flash when you don't know what you're doing. It could BRICK your phone. And I will NOT support it when you screw up your phone.
S8500DDJE7_MAY
S8500JVKC1_MAR
S8500XXJD9_APR
S8500XXJEE_MAY
S8500XXJEF_JUN
S8500XXJF1_JUN
S8500XXJF4_JUL
S8500XXJH2_DEC
S8500XXJH2_NOV
S8500XXJH3_AUG
S8500XXJI3_FEB
S8500XXJI3_NOV
S8500XXJID_SEP
S8500XXJK2_MAY
S8500XXJL2_APR
S8500XXJL2_DEC
S8500XXJL2_MAR
SO WHAT WE NEED
MULTI LOADER
ZIMAGE AND STUFF
EXT2 IMG FILE SYSTEM
PART1
PART2
FOTA(RESTORED OLD ONE)
Ok before we start. The tutorial is now 100% Rewritten. But you still need to read carefully
Notice
Clean out your ENTIRE bada storage first cause we will need almost everything of it
Notice2: This project is still in ALPHA Stage. So don't expect a fully awesome working version yet.
In this version all KNOWN fixes are implented except for root
1. Download all the needed files, when you've done so extract the ZIP with the zImage stuff in it and place it in you bada storage root. (you can extract the .001 with 7-zip)
(i made the Images URLS's because they're to big)
1b. Connect your phone and put it in Mass Storage mode
2.Then you should shut down your phone and boot it in download mode:
Vol Down+Camera+Power and you will see DOWNLOAD MODE on the screen
3.Open up multiloader and take over my config here:
http://shadowas1.com/badadroid/multiloader.png
When you click port search the name "LISMORE" should/can popup next to the right COM port
Now click download and wait for it to finish
Okay, now your phone is ready for the first android run
Boot it by holding power+menu+vol up: (see image)
http://shadowas1.com/badadroid/IMG_0052.JPG
Then this should popup (after the SGS screen)
DO NEVER, ABSOLUTELY NEVER PULL OUT BATTERY OR TOUCH THE PHONE IN THIS PROCESS
http://shadowas1.com/badadroid/IMG_0050.JPG
This can take up to 5 minutes.
Now, Two things can happen
1. The phone boots bada
2. The phone shuts down
In any of this cases your phone is absolutely fine. If you have case 2 you can boot bada to check if everythings alright if you wish.
Assuming we all boot bada shut down the phone again
Boot android in the normal way by holding the Power and Call key
ENJOY !!!
READ CAREFULLY
Disclaimer:
This stuff is still experimental, me, nor the devs will be responsible for any damage done to you, your phone or whatsoever, so USE AT OWN RISK
Warning:
Do NOT flash when you don't know what you're doing. It could BRICK your phone. And I will NOT support it when you screw up your phone.
FAQQ: It doesn't work I've done everything but it doesnt work
A: Do you even think we CAN answer the question if you ask it like that?
Q: My phone shuts down after 2 minutes, why?
A: It's an idle bug.. We're still looking for a solution
Q: When will GB be released, When will the modem drivers be finished.. etc..
A: WE DON'T KNOW! STOP ASKING THIS
What WORKS in this build
A: Do you even think we CAN answer the question if you ask it like that?
Q: My phone shuts down after 2 minutes, why?
A: It's an idle bug.. We're still looking for a solution
Q: When will GB be released, When will the modem drivers be finished.. etc..
A: WE DON'T KNOW! STOP ASKING THIS
What WORKS in this build
- WiFi (+dhcp)
- Market
- 3D Games (some maybe not)
- Launchers (tested TWLauncher, Zeam, LauncherPRO)
- Audio (FULL Working now)
- Video's (see my livestream.com example)
What does NOT work in this build - Modem (3G, Calls, ETC) (works partially on oleg's build we're still working on it)
- Idle time (also known as the shutdown bug)
- Sensors (Causes battery bug)
S8500DDJE7_MAY
S8500JVKC1_MAR
S8500XXJD9_APR
S8500XXJEE_MAY
S8500XXJEF_JUN
S8500XXJF1_JUN
S8500XXJF4_JUL
S8500XXJH2_DEC
S8500XXJH2_NOV
S8500XXJH3_AUG
S8500XXJI3_FEB
S8500XXJI3_NOV
S8500XXJID_SEP
S8500XXJK2_MAY
S8500XXJL2_APR
S8500XXJL2_DEC
S8500XXJL2_MAR
SO WHAT WE NEED
MULTI LOADER
ZIMAGE AND STUFF
EXT2 IMG FILE SYSTEM
PART1
PART2
FOTA(RESTORED OLD ONE)
Ok before we start. The tutorial is now 100% Rewritten. But you still need to read carefully
Notice
Clean out your ENTIRE bada storage first cause we will need almost everything of it
Notice2: This project is still in ALPHA Stage. So don't expect a fully awesome working version yet.
In this version all KNOWN fixes are implented except for root
1. Download all the needed files, when you've done so extract the ZIP with the zImage stuff in it and place it in you bada storage root. (you can extract the .001 with 7-zip)
(i made the Images URLS's because they're to big)
1b. Connect your phone and put it in Mass Storage mode
2.Then you should shut down your phone and boot it in download mode:
Vol Down+Camera+Power and you will see DOWNLOAD MODE on the screen
3.Open up multiloader and take over my config here:
http://shadowas1.com/badadroid/multiloader.png
When you click port search the name "LISMORE" should/can popup next to the right COM port
Now click download and wait for it to finish
Okay, now your phone is ready for the first android run
Boot it by holding power+menu+vol up: (see image)
http://shadowas1.com/badadroid/IMG_0052.JPG
Then this should popup (after the SGS screen)
DO NEVER, ABSOLUTELY NEVER PULL OUT BATTERY OR TOUCH THE PHONE IN THIS PROCESS
http://shadowas1.com/badadroid/IMG_0050.JPG
This can take up to 5 minutes.
Now, Two things can happen
1. The phone boots bada
2. The phone shuts down
In any of this cases your phone is absolutely fine. If you have case 2 you can boot bada to check if everythings alright if you wish.
Assuming we all boot bada shut down the phone again
Boot android in the normal way by holding the Power and Call key
ENJOY !!!
0 comments:
Post a Comment